All

Racingline R-06 8.5J x 18inch Alloy Wheel Set - Gloss Gunmetal Grey THIS LISTING IS FOR A SET OF FOUR ALLOY WHEELSThe RacingLine VWR R-06 18" Flow-Formed Alloy Wheel is the perfect balance of timeless design, lightweight engineering, and uncompromising strength. Designed in an 8.5 x 18” size with an ET44 offset, the R-06 delivers both performance and style, whether for the challenges of daily driving or the demands of the track. Precision Flow-Formed ConstructionCrafted using advanced flow-forming technology, the barrel of the wheel is spun under intense heat and pressure to refine the aluminium’s grain structure. This process produces a wheel that is significantly stronger and lighter than traditional cast wheels, enhancing handling, acceleration, and efficiency without compromising durability. Performance-Ready DesignAt just 9.9kg (21.3lbs) per wheel, the R-06 achieves the ideal balance between weight savings and the robust strength required for long-lasting road and track use. Perfect Fitment for VWG PlatformsWith a fitment of 8.5 x 18” ET44 and 5x112 PCD, the VWR R-06 is tailored for VWG MQB, MQB EVO, and A5 platform vehicles. The 18” diameter is popular for many drivers, chosen to optimise both road and track performance by allowing a squarer tyre profile and improved clearance without the risk of rubbing.  Developed to exceed OEM standards, each wheel is rigorously tested for impact resistance, structural fatigue, load rating, and geometric accuracy. Maximum load capacity is an impressive 560kg, certified to ISO 7141 standards. Notes: 8.5J x 18" 5 x 112 PCD ET44 Offset Weight: 9.9kg / 21.3lb per wheel RacingLine Centre Caps Included Confirmed Fitment: VOLKSWAGEN > VW Golf 8 & 8.5 2020+> VW Golf 7 & 7.5 2013-2020> VW Passat B8 2015+> VW Arteon 2017+> VW T-Roc 2017+> VW Golf 5 2005-2008> VW Golf 6 2008-2014> VW Scirocco 2008-2017> VW Jetta / GLI 5 2005-2011> VW Jetta / GLI 6 2011-2018> VW Jetta / GLI 7 2018+ AUDI > Audi S3 8Y & 8Y.2 2020+> Audi A3 8Y & 8Y.2 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TFSI 8V 2015-2017> Audi TT 3 8S 2014+> Audi SQ2 2018+> Audi S3 8P 2006-2012> Audi A3 8P 2003-2012> Audi TT II 8J 2006-2014 SEAT / CUPRA > Cupra Leon 4 & 4.5 FW 2020+> SEAT Leon III 5F 2015-2020> SEAT Leon II 1P 2005-2012> Cupra Formentor 2020+> Cupra Ateca 2018+ SKODA > Skoda Octavia IV NX 2020+> Skoda Octavia III 5E 2014-2020> Skoda Octavia II 1Z 2004-2013

Read more less

Delivering repeated cool intake air temperatures for your Audi RS3 8V.2 / 8Y or TTRS 8S EA855. Again and again and again. What it does.The factory intercooler on the Audi RS3 & TTRS has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System uses a stepped core to give a 70% volume increase over the factory cooler - making it one of the best performing intercooler upgrade on offer for the 2.5 TFSI. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.  Fitment is specific for the Audi RS3 8V.2 and 8Y - meaning no cutting or drilling is required to fit, and it's carefully designed to retain and fit around the car's original front crash bar. For TTRS, some trimming to the plastic front panel is required. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a high-speed stepped core using extra tall internal tubes for maximum boost flow and a 76.8% increase in frontal area. SOPHISTICATED CORE Highly effective aluminium plate & bar construction, developed following rigorous testing to optimise core dimensions, fin density, and pipe flow providing a 70% volume increase. FLOWED END TANKS Cast construction end tanks for minimal turbulence and restriction use internal flow guides to divert airflow up and down across the entire core depth, with 70mm inlet & outlet. Confirmed Applications.2.5 TFSI EA855 engines (400ps)  Engine codes: DAZA, DAZC, DNWA, DXHA VWR143000 AUDI RS3 8Y 2021+ AUDI RS3 8V.2 2017-2020 AUDI TTRS 8S 2017+  * some trimming to front panel required Precision Engineered forPerfect Performance. OEM-fitment, requiring no drilling or cutting for perfect fitment on RS3. Giant core volume of 14,141,500mm³ vs 8,345,600mm³ for the factory cooler core. Don't confuse our 'Plate & Bar' construction with the cheaper and less-effective 'Tube & Fin' construction that most aftermarket intercoolers use. Intercooler outlets are 70mm - meaning stock boost pipes or our upgraded boost pipes can be used. Intercooler Performance.It's all about air intake temperatures. The OEM factory intercooler on the Audi RS3 & TTRS struggles with containing the all-important air intake temperatures once power is upgraded. So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour. The RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run.

Read more less

Delivering lovely cool intake air temperatures for your Polo GTI 2.0 TSI AW & AW.2. Again and again and again. What does it do?The factory intercooler on the Polo GTI AW has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System uses a stepped core to give a 56% volume increase over the factory cooler - making it the best performing intercooler upgrade on offer for the MQB-A0 platform Polo GTI AW. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.  Fitment is specific for the Polo GTI AW - meaning no cutting, drilling or modifications to the crashrequired to fit. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a high-speed stepped core using extra tall internal tubes for maximum boost flow and a 25% increase in frontal area. SOPHISTICATED CORE Highly effective aluminium plate & bar construction, developed following rigorous testing to optimise core dimensions, fin density, and pipe flow providing a 56% volume increase. SMOOTH END TANKS Cast construction end tanks for minimal turbulence and restriction delivering maximum flow across the entire core depth, with 60mm inlet & outlet. CONFIRMED APPLICATIONSVWR141001 VW POLO GTI AW 2017-2021 VW POLO GTI AW.2 2021+ AUDI A1 40 TFSI GB 2017+ OEM-fitment, requiring no drilling or cutting for perfect fitment. Giant core volume of 10,039,737mm³ vs 6,440,000mm³ for the OEM core. Don't confuse our 'Plate & Bar' construction with the cheaper and less-effective 'Tube & Fin' construction that most aftermarket intercoolers use. Intercooler outlets are 60mm - meaning stock boost pipes or our upgraded boost pipes can be used. INTERCOOLER PERFORMANCE.It's all about air intake temperatures. The OEM factory intercooler on the Polo GTI 2.0 TSI struggles with containing the all-important air intake temperatures once power is upgraded. So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour. The RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run.

Read more less

Purpose-designed for the 2.0 TSI MQB 'Evo' engine, this is the largest-volume intercooler available for this platform. What it does.The factory intercooler on the 2.0 TSI MQB 'Evo' has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System uses a huge 70mm core to give a 96% volume increase over the factory cooler - making it the largest volume and best performing intercooler upgrade on offer for the 2.0 TSI gen.4. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.  Increased 70mm inlet and outlet sizes allow for higher flow versus the 60mm factory outlets, with matching Boost Hoses provided with the intercooler kit. Unlike most aftermarket intercoolers listed for the MQB 'Evo' platform, ours has been designed exclusively for the 2.0 TSI Gen.4 from the ground-up. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a 70mm high-speed core using extra tall internal tubes for maximum boost flow and a massive 96% increase in volume. BOOST HOSES INCLUDED Internally-wired OEM fitment 70mm boost hoses are included, multi-ply to resist heat deformation and burst pressure. Supplied with stainless steel Mikalor-brand clamps. FLOWED END TANKS Cast construction end tanks for minimal turbulence and restriction use internal flow guides to divert airflow up and down across the entire core depth, with enlarged 70mm inlet & outlet. Confirmed applications. 2.0 TSI MQB Evo / EA888 Gen 4 engines only VWR141000 > VW Golf 8 & 8.5 GTI 2020+ > VW Golf 8 & 8.5 GTI Clubsport 2020+ > VW Golf 8 & 8.5 R 2020+ > VW Arteon 2.0 TSI EA888.4 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI EA888.4 2021+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+ > Audi A3 2.0 TSI 8Y & 8Y.2 2020+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Audi SQ2 (facelift EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+ > Cupra Leon 4 & 4.5 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia 4 & 4.5 vRS 2.0 TSI 245ps NX 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+   Precision Engineered forPerfect Performance. Giant core volume of 19,404,000mm³ vs 9,895,200mm³ for the factory cooler core Internal flow guides to optimise internal air flow via cast end-tanks Sophisticated 'Plate & Bar' construction outperforms the cheaper, less-effective 'Tube & Fin' construction Multi-ply, reinforced Boost Hoses are moulded with internal steps to maximise laminar airflow Intercooler outlets are 70mm vs 60mm for the OE cooler for increased flow Intercooler Performance.It's all about air intake temperatures. The OEM factory intercooler on the 2.0 TSI MQB 'Evo' struggles with containing the all-important air intake temperatures, especially once power is upgraded. So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour. With a 70mm core-depth (vs 60-65mm for most other aftermarket intercoolers) and giant internal volume, the RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run. Intercooler fitment. To accommodate the giant size of the RacingLine Intercooler, some light trimming of the black plastic radiator carrier is required.   This trimming is minimal on popular models such as the Golf mk8, but more may be required on some other MQB 'Evo' models.   For reference, fitment is designed for radiator carrier –  VW Part No. / 5H0 805 588 J

Read more less